Site Accessibility Information Access Key 1 to Skip to Top Navigation Access Key 2 to Skip to the Three One One link Access Key 3 to Skip to City of Winnipeg Main Menu Access Key 4 to Skip to Left Navigation Menu Access Key 5 to Skip to Content area Access Key 6 to Skip to Right Sidebar content area Access Key 7 to Skip to Footer Links

Image of water running out of a tap2009 Winnipeg water quality test results

Winnipeg is the last location where we add chlorine to the water - at the outlet from each of the three pumping stations. The other locations are at the Shoal Lake intake and at the Deacon Reservoir outlet. We maintain an average free chlorine residual of between 0.3 and 0.4 milligrams per litre in the distribution system.

Testing
Winnipeg water is intensively monitored on a routine basis to ensure that the water is safe and that regulatory requirements are met. Because water quality is so important, our level of monitoring and sampling exceeds Provincial regulatory requirements.

  • We monitor chlorine at the places where it is added and test at 39 locations throughout the distribution system. Equipment is used to continuously monitor chlorine levels at the pumping stations and the distribution system levels are checked weekly.
  • Microbiological samples are taken weekly at over 60 locations throughout the system. Tests are conducted for general bacteria and for coliform bacteria according to Provincial regulations.

We also test Winnipeg water for:

  • routine water chemistry
  • metals (analyzed both by us and the Province)
  • disinfection by-products

We measure how water quality changes within the distribution system and the quality of water delivered to customers with these tests. We also respond to customer inquiries and complaints about water quality. Contact us for more information.

What is being
measured
How it's
measured
Guideline
or regulation
Winnipeg
average
Winnipeg
range
Comments
Odour units Inoffensive 80 60 to 150 Does not always meet the guideline
Geosmin parts per trillion no guideline 3.9 0.5 to 10.0 Common taste and odour compound
IPMP - 2-isopropyl-3-methoxypyrazine parts per trillion no guideline <0.8 <0.5 to <5 Common taste and odour compound
IBMP - 2-isobutyl-3-methoxypyrazine parts per trillion no guideline <0.8 <0.5 to <5 Common taste and odour compound
MIB - 2-methylisoborneol parts per trillion no guideline 5.4 <0.5 to 16.6 Common taste and odour compound
246 TCA - 2,4,6-trichloroanisole parts per trillion no guideline <0.8 <0.5 to <5 Common taste and odour compound
236 TCA - 2,3,6-trichloroanisole parts per trillion no guideline <0.8 <0.5 to <5 Common taste and odour compound
345 TCV - 3,4,5-trichloroveratrole parts per trillion no guideline <0.8 <0.5 to <5 Common taste and odour compound
MTBE - methyl tertiary-butyl ether parts per million no more than 0.015 <0.8 <0.5 to <1 Meets the guideline
NDMA -N-nitrosodimethylamine parts per billion under review 57 <5 to 179 Guideline under review by Health Canada
Chlorophyll-a parts per billion no guideline <1 <1 to 1 Chlorophyll is found in algae
Microcystin LR parts per billion no more than 1.5 <0.2 <0.2 to 0.3 Meets the guideline
Turbidity (clearness) Nephelometric turbidity units no more than 1.0 0.53 0.14 to 2.57 Does not always meet the guideline
Colour, True units no more than 15 5 <5 to 5 Meets the guideline
Total Dissolved Solids milligrams per litre no more than 500 104 96 to 112 Meets the guideline
Conductivity microsiemens per centimetre no guideline 162 150 to 180 Another measure of dissolved solids
pH units between 6.5 and 8.5 7.48 7.00 to 7.73 Meets the guideline
Temperature degrees Celsius no more than 15 9.4 1.9 to 21.5 Does not always meet the guideline
Total Alkalinity parts per million as calcium carbonate no guideline 70 53 to 85  -
Total Hardness parts per million as calcium carbonate between 80 and 100 81 72 to 97 Does not always meet the guideline
Total Organic Carbon parts per million no guideline 7.7 6.0 to 10.0  -
Total Inorganic Carbon parts per million no guideline 15.4 13.5 to 19.0  -
Fluoride* parts per million no more than 1.5 0.84 0.76 to 0.94 Meets the guideline
Nitrate Nitrogen parts per million no more than 10 0.013 <0.01 to <0.05 Meets the guideline
Phosphorus as Phosphate parts per million no guideline 1.96 1.82 to 2.09 Added for Lead Control Program
Chloride parts per million no more than 250 7.8 <9.0 to 13.8 Meets the guideline
Sulfate parts per million no more than 500 3.1 2.2 to 3.9 Meets the guideline
Chlorine (free) parts per million no guideline 0.56 0.07 to 1.05  -
Chlorine (total) parts per million no more than 3 0.89 0.24 to 1.48 Meets the guideline
Trihalomethanes parts per billion no more than 100 94 31 to 140 Does not always meet the guideline
Bromodichloromethanea parts per billion no more than 16 9 4 to 13 Meets the guideline
Haloacetic acids parts per billion no more than 80 81 20 to 152 Does not always meet the guideline
Aldehydes parts per billion no guideline 24 13 to 41  -
Calcium parts per million no guideline 21.4 19.2 to 23.9 Contributes to hardness
Magnesium parts per million no guideline 6.04 5.59 to 6.81 Contributes to hardness
Sodium parts per million no more than 200 2.1 1.9 to 2.3 Meets the guideline
Potassium parts per million no guideline 1.20 1.05 to 1.32  -
Iron parts per million no more than 0.3 0.04 0.03 to 0.05 Meets the guideline
Copper parts per million no more than 1.0 <0.001 <0.001 to <0.001 Meets the guideline
Lead* parts per million no more than 0.01 <0.001 <0.001 to <0.001 Meets the guideline
Aluminum parts per million no more than 0.1 0.003 0.002 to 0.007 Meets the guideline
Arsenic parts per million no more than 0.01 <0.001 <0.001 to <0.001 Meets the guideline
Chromium parts per million no more than 0.05 <0.001 <0.001 to <0.001 Meets the guideline
Nickel parts per million no guideline <0.001 <0.001 to <0.001  -
Cadmium parts per million no more than 0.005 <0.001 <0.001 to <0.001 Meets the guideline
Manganese parts per million no more than 0.05 0.006 0.002 to 0.012 Meets the guideline
Zinc parts per million no more than 5.0 <0.001 <0.001 to 0.007 Meets the guideline
Mercury parts per million no more than 0.001 <0.000001 <0.0000005 to 0.0000014 Meets the guideline
Antimony parts per million no more than 0.006 0.00031 <0.0002 to 0.00041 Meets the guideline
Barium parts per million no more than 1 0.0166 0.0160 to 0.0181 Meets the guideline
Beryllium parts per million no guideline <0.0002 <0.0002 to <0.0002  -
Bismuth parts per million no guideline <0.0002 <0.0002 to <0.0002  -
Boron parts per million no more than 5 <0.01 <0.01 to 0.012 Meets the guideline
Cesium parts per million no guideline <0.0001 <0.0001 to <0.0001  -
Cobalt parts per million no guideline <0.0002 <0.0002 to <0.0002  -
Lithium parts per million no guideline 0.00232 0.00230 to 0.00234  -
Molybdenum parts per million no guideline <0.0002 <0.0001 to <0.0002  -
Selenium parts per million no more than 0.01 <0.001 <0.0002 to <0.001 Meets the guideline
Silicon parts per million no guideline 0.74 0.36 to 1.06  -
Silver parts per million no guideline <0.0001 <0.00005 to <0.0001  -
Strontium parts per million no guideline 0.042 0.037 to 0.047  -
Tellurium parts per million no guideline <0.0002 <0.0002 to <0.0002  -
Thallium parts per million no guideline <0.0001 <0.00002 to <0.0001  -
Thorium parts per million no guideline <0.0001 <0.0001 to <0.0001  -
Tin parts per million no guideline <0.0006 <0.0002 to 0.00066  -
Titanium parts per million no guideline <0.0009 0.0002 to <0.0009  -
Uranium parts per million no more than 0.02 <0.0001 <0.0001 to <0.0001 Meets the guideline
Vanadium parts per million no guideline 0.00028 <0.0002 to 0.00038  -
Zirconium parts per million no more than 0.1 <0.0004 <0.0004 to <0.002 Meets the guideline
* Fluoride was added in accordance with the Provincial Fluoridation Program guideline to reach an optimal concentration of 0.85 parts per million.
** Does not include the results from our monthly household lead monitoring program.
a Effective April 2009, the guideline statement for trihalomethanes in drinking water is modified to remove the separate guideline for BDCM, recognizing that the maximum acceptable concentration for THMs is protective of the health effects of all THMs, including BDCM.

Bacterial Testing

What is being measured Guideline Our test results Comments
Number of total coliform bacteria tests in year 1820 samples 3,061 More testing than required by the guideline/provincial regulation
Number of times that total coliform bacteria show up in a test no more than 10% of samples with positive total coliform or no consecutive positives from the same site. 0.2% (7 positive tests) All resamples were negative and met the guideline/provincial regulation
Number of Escherichia coli bacteria tests in year 1820 samples 3,061 More testing than required by the guideline/provincial regulation
Number of times that Escherichia coli bacteria show up in a test no bacteria present in the sample 0.0% (no positive tests) All samples were negative and met the guideline/provincial regulation
Number of heterotrophic (bacteria) plate count (HPC) tests done no guideline 3,061 Heterotrophic plate count is not required under the new provincial regulations.

Guidelines from 'Summary of Guidelines for Canadian Drinking Water Quality' by Health Canada, revised March 1, 2010.

 Select this icon to print a printer friendly version of this page This page is printer friendly.

top of pageTop of page

This page was last updated on April 15, 2024

Was this information helpful?

How can we make this web page better?

Information collected will be used to improve our website. Do not use this form to submit a request for service or information because it will not be forwarded to departments for response. To submit a request for service or information, contact 311.

This form is not intended to collect personal information; however, any personal information you choose to include in your comments is collected by the City of Winnipeg under the authority of section 36(1)(b) of the Freedom of Information and Protection of Privacy Act for the purpose of improving our website and will not be used or disclosed for any other purposes, except as authorized by law. Contact the Corporate Access and Privacy Officer by mail (City Clerk’s Department, Susan A. Thompson Building, 510 Main Street, Winnipeg MB, R3B 1B9) or by telephone (311) if you have any questions about the collection of this information.

Ces renseignements sont-ils utiles?

Comment pourrait-on améliorer cette page Web?

Les renseignements recueillis serviront à l’amélioration de notre site Web. Prière de ne pas se servir de ce formulaire pour soumettre une demande de service ou de renseignements, car la demande ne sera pas transmise au service en question. Pour soumettre une demande de service ou de renseignements, veuillez communiquer avec le 311.

Le présent formulaire ne vise pas à recueillir des renseignements personnels. Cependant, les renseignements personnels que vous choisissez d’inclure dans vos commentaires sont recueillis par la Ville de Winnipeg en conformité avec l’alinéa 36(1)b) de la Loi sur l’accès à l’information et la protection de la vie privée dans le but d’améliorer son site Web et ne seront ni utilisés ni divulgués pour d’autres raisons, sauf dans les cas où cela est autorisé par la loi. Communiquez avec l’agent de l’accès à l’information et de la protection de la vie privée de la Ville par courrier au Bureau du greffier, immeuble Susan-A.-Thompson, 510, rue Main, Winnipeg (Manitoba) R3B 1B9, ou par téléphone au 311 si vous avez des questions sur la collecte de ces renseignements.